spline
/ˈsplaɪ̯n/Giriş yap, bu kelimeyi “Kelimelerim”e ekle.
Fiil çekimi düzenli
Yalın (V1)spline
3. tekil (-s)splines
-ingsplining
Past (V2)splined
Participle (V3)splined
Düzenli fiil — biçimler kurala göre üretilmiştir.
Çeviriler
isim
- dil General
- yiv General
- oluk General
- çubuk pistole Technical
- eğri cetveli Technical
- freze Technical
- kama Technical
- mil yuvası Technical
- mil yivi Technical
- şaft dişi Technical
- şaft çıkıntısı Technical
- tahta şerit Technical
- iç ve dış dişlileri birbirine geçirmek suretiyle birleştirme Mechanic
fiil
- freze oluklu geçme yapmak Technical
Tanımlar (İngilizce)
- isim A long, thin piece of metal or wood.
- isim A strip of wood or other material inserted into grooves in each of two pieces of wood to provide additional surface for gluing.
- isim A flexible strip of metal or other material, that may be bent into a curve and used in a similar manner to a ruler to draw smooth curves between points.
-
isim
Any of a number of smooth curves used to join points.
“These conditions provide a framework which encompasses some notable approximation kernels including splines, so-called cardinal functions, and many radial basis functions such as the Gaussians and general multiquadrics.”
- isim A ridge or tooth on a drive shaft that meshes with a corresponding groove in a mating piece and transfers torque to it, maintaining the angular correspondence between the pieces; either the ridge or the groove, as part of a set of both (splines); the whole set of ridges and grooves.
-
isim
A rectangular piece that fits grooves like key seats in a hub and a shaft, so that while the one may slide endwise on the other, both must revolve together.
“Near-synonym: feather”
- fiil To smooth (a curve or surface) by means of a spline.
-
fiil
To fit with a spline.
“Machining a straight spline with a lathe. Sometimes the task of splining a shaft comes up during a repair. Instead of sending out the job, use this setup to mill the splines on a lathe.”
-
fiil
To fasten to or together with a spline.
“Engineers did not think two crankshafts could be synchronized. Wood, by splining the shafts in each gear box, proved it could be done.”
Eş anlamlılar
İlgili gramer konuları
Bu kelimenin türüne göre konu anlatımları: